Shenzhen IVS Flow Control Co.,Ltd

Shenzhen IVS Flow Control Co.,Ltd is one of the leading tubes creep test system manufacturers and suppliers in China, welcome to wholesale customized tubes creep test system from our factory.

Standards:

• SAE.J157-100R

• SAE.J2044-2002

Applications:
The tubes creep test system can be used to perform hydraulic burst pressure test, gas pressure test and creep testing with gas medium.
The being tested tubes size: Φ6mm~Φ50mm *(Optional)

Technical Data:

• End fittings burst test:

• Test pressure range: 0-400 MPa *(optional);

• Operating temperature range: 20 ℃ ~ 1,000 ℃

• Working environment: air;

• Rate of pressure rise: 0.23 ± 0.02 MPa /s;

• Infrared temperature measuring device accuracy: ± 5 ℃.
  

• Tubes burst test:

• Test pressure range: 0-400 MPa *(optional);

• Operating temperature range: 20 ℃ ~ 1,000 ℃

• Working environment: air;

• Rate of pressure rise: 5GPa/s (20℃), 3.5GPa/s (380℃);

• Infrared temperature measuring device accuracy: ± 5 ℃.

• Tubes creep test with gas pressure:

• Test pressure range: 0-100 MPa;

• Operating temperature range: 20 ℃ ~ 1200 ℃;

• Working environment: Ar gas or other protective gases;

• Axially pulling stress load: 0 ~ 20kN;

• Max. temperature: 1300 ℃, temperature measuring accuracy: ± 5 ℃;

• The protective gas is available to tested tube from outside;

• Observation window is available to check up radial strain under pressure;